23rd - 27th March 2009

Back to Photo

  • Image 01

    PATTERN MAKING - DARREN

    Darren is messy!!!

    That is all!!!!

  • Image 02

     

    PATTERN MAKING - DARREN

    Darren is carefully cleaning up some etching that has just been soldered on to the new BRK 152.

  • Image 03

     

    PATTERN MAKING - Mr. P
    The pink one is marking out the position of a hole on the roof of the IPV 33.

    They can then be drilled before going to the paint room.

  • Image 04

    PATTERN MAKING - Mr. P

    This is some of the etching for the LDM 37.

  • Image 05

    SMALL PARTS CASTING - IAN

    Ian is using the magnifying glass to help spot any faults on the pieces.

  • Image 06

    PLATING CASTING - ANDY

    Breaking open a mould........

  • Image 07

    PLATING CASTING - ANDY

    ...to reveal these!!

    In frames, ready for plating.

  • Image 08

    FETTLING - DAVE

    Bristols.

  • Image 09

    PAINT ROOM - BOB

    Bob is sanding off a lump that was spotted during spraying.

  • Image 10

    Ashes to ashes......

    More dead models.

  • Image 11

    FINAL ASSEMBLY - MARTYN

    Finished LDM 71's ready for bagging.

  • Image 12

    FINAL ASSEMBLY - ANGIE

    The BRK 151 is on the bench and being assembled as we speak.

  • Image 13

    BM's SECRET PROJECT
    (Don't tell us you'd forgotten about it !?!)

    Any ideas on what it could be.

  • Image 14

    ONE MORE HAPPY VISITOR !!!!!!!

    Costas Rafti and BM's Nigel Parker.

  • Image 15

    BM's SECRET PROJECT

    Brooklin Models will be producing a model lawnmower for

     

     

     

     

     

    This will almost certainly end up being an entire range of models based on historically interesting lawnmowers from days gone by.

    This is a test piece (which has been knocked around a bit as you can see from the paint chips) but it give you and idea of the finished piece.

  • Pic 16

    BM's SECRET PROJECT


    The two side pieces (with lots of nice detail cast into them) are actually bolted together!!!!!

  • Pic 17

    BM's SECRET PROJECT

    See, it's just like Meccano.
    Darren has even made up a little spanner to tighten the nuts onto the ends of the bars.

  • Pic 18

    BM's SECRET PROJECT

    The bolted together piece before being sent to the paint room to be painted green.

  • Pic 19

    BM's SECRET PROJECT

    These blades will be painted red.

  • Pic 20

    BM's SECRET PROJECT

    Not all of the pieces are finished or painted but it's so very close that we couldn't wait to show you all.

Gallery Listings

How They're Made