30th March - 3rd April

Back to Photo

  • Image 01

    PATTERN MAKING - DARREN

    Darren is working on the lawnmower for The Old Lawnmower Company.

    This is the grass collecting box for the front.

  • Image 02

    PATTERN MAKING - Mr. P

    Mr. P has been cleaning up some secondary masters for the new LDM 72.

    On the left are the ones that have been sanded and wire brushed,
    on the right are the bumpers as they
    come out of the moulds.

  • Image 03

    PATTERN MAKING - Mr. P

    The poor chap was obviously bored at lunch time.

  • Image 04

    PATTERN MAKING - Mr. P

    Mr. P is making more paint masks.

    It's really odd to see a solid resin version of one of our cars.

  • Image 05

    PATTERN MAKING - Mr. P

    This is the finished mask after it is pulled from the resin car pictured above.

  • Image 06

    SMALL PARTS CASTING - IAN

    Ian is using a very sharp knife to remove excess metal from these Mustang seat pans.

  • Image 07

    FETTLING - RICH

    Richard has been preparing the new Mustang bodies for painting.

  • Image 08

    PLATING CASTING - ANDY

    Hood ornaments for the BRK 152.

  • Image 09

    BODY CASTING - BIG ANDY

    Andy has just cast these BRK 151 bodies,
    you can see why they need to be fettled before spraying.

  • Image 10

    FETTLING - LITTLE ANDY

    A rear end shot of the LDM 44.

  • Image 11

    PLATING CASTING - ANDY

    A delivery has just arrived from the Platers.
    Andy is sorting through everything to check that it's all looking good.

  • Image 12

    PAINT ROOM - TIM

    The new mustang !!!
    It's going to be amazing !!!!!

    Just imagine this fully plated with two gold stripes going over the top.

  • Image 13

    FINAL ASSEMBLY - MARTYN

    We haven't done theses BRK 69's for a while.
    The wood effect stickers have just been applied.

  • Image 14

    FINAL ASSEMBLY - MARTYN

    These BRK 151's are ready to be bagged.

  • Image 15

    The Old Lawnmower Company

    Work is proceeding well for this special project that BM are working on.

    We had loads of emails from you lot after revealing them last week,
    Lots of interest was shown.
    We'll keep you updated.

  • Image 16

    FINAL ASSEMBLY - ANGIE

    Angie is cutting out windows for the BRK 138.

  • Image 17

    MOULD MAKING - RICH

    Rich is carefully laying out LDM 68 door handles to make a mould.

  • Image 18

    MOULD MAKING - RICH

    Tweezers are essential as the pieces are tiny.

Gallery Listings

How They're Made