22nd - 26th February 2010

PATTERN MAKING - DARREN

Darren is on holiday at the moment.......
so there's about the same amount of work being done as usual!!!!

PATTERN MAKING - Mr. P

A wide angle shot for you.

It's hard to believe that anything decent comes out of this mess but the master makers appear to know what they're doing.

SMALL PARTS CASTING - IAN

WOW. That's a lot of baseplates.

BRK 153's by the looks of it.

SMALL PARTS CASTING - IAN

Half of the rear-mounts for the BRK 90a rework.

FETTLING - RICH

MORE Mustangs are being built.

Mustangs are always popular.

PLATING CASTING - ANDY

This is a mould for the 'generic' wipers that we use on many cars.

PLATING CASTING - DAVE

This is the US30 rear section that has the fuel tanks mounted under it.

PAINT ROOM - NICK

Lovely orangey-brown roof pieces for the BC 011.

They look nicer on the model!!!

PAINT ROOM - BOB

Lots of the  ROD 24 bodies drying, for the finished model see last weeks diary.

PAINT ROOM - TIM

Tim is applying the colour coat to a LDM 34 Singer SM 1500.

FINAL ASSEMBLY - NEIL

Remember the pic I said to take note of?

Can you see where the tin of red paint is?

FINAL MESS MAKING - NEIL

One word springs to mind

FAIL

MURDER SCENE - NEIL

Any Police officers viewing, please note that this isn't what it looks like........

MOULD MAKING - NEIL P.

Mr. Parker is about to make a production mould for the BC 012.

These are the secondaries that he will use.

There are also some parts for the IPV 37 that he has to make mould for too.

FINAL ASSEMBLY

This is the finished test assembly of the BRK 162.

The colour is called 'Bitter-sweet'

We call it 'Cream of Tomato'